Product Instructions & Safety

FIFO Product Instructions

FIFO CAR CHARGER

OWNER’S MANUAL

Thank you for purchasing this FIFO product. Please read this manual carefully. It contains important operating instructions. To download this Owner’s Manual, click the PDF icon on the left. This unit is designed for charging standard USB devices in a motor vehicle with an auxiliary power output that delivers 12V-24V.

SPECIFICATIONS:

Product SKU: 60201, 60202, 60208, 60408, 60212, 60421, 60016, 60018, 47172, 47175

Input: 12-24V

Output*:

for SKUs 60201, 60202, 60208: 5V DC2.1A

for SKUs 60408, 60212, 60421, 60016, 60018: DC5V/3.1A

for SKUs 47172, 47175: DC5V/3.1A

*Unless stated otherwise

SAFETY PRECAUTIONS

Do not short circuit.
Ensure correct voltage is used as continuous excessive voltage could damage your equipment.
Do not try to use this power supply with an appliance requiring more than 2.1A.
Do not attempt to open this unit.
Remove from mains when not in use.
Do not use if the unit appears to be damaged.
Do not use devices near water.
The socket outlet should be installed near the equipment and should be easily accessible.

INSTRUCTIONS FOR USE

Important: Check for voltage compatibility with your device first

Before using, check your device’s input voltage and this charger’s output voltage if they can match. Make sure the total loading does not exceed the rated output current of this charger.
Connect your device to the charger using a FIFO USB cable.
Plug this car charger into your vehicle 12V-24V outlet.
Your digital device should indicate it is now in charging mode
Please unplug this charger from your vehicle’s 12V-24V outlet when not in use.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Imported by: BCCN SPRL , Avenue de l’Emeraude 41/1, 1030 Brussels , +32 2 779 38 36

FIFO HOME CHARGER

OWNER’S MANUAL

Thank you for purchasing this FIFO product. Please read this manual carefully. It contains important operating instructions.

This unit is designed for charging/power up standard USB devices.

SPECIFICATIONS*

Product SKU : 60203, 60204, 60207, 60407, 60422, 60017, 60019, 47173, 47176

Input: 100-240V AC 50/60Hz

Output*:

for SKUs 60203, 60204, 60207: DC 5V 2.1A

for SKUs 60407, 60422, 60017, 60019: DC5V/3.1A

for SKUs 47173, 47176: DC 5V 3A, 9V 2.22A, 12V 1.67A

*Unless stated otherwise

SAFETY PRECAUTIONS

Do not short circuit.
Ensure correct voltage is used as continuous excessive voltage could damage your equipment.
Do not try to use this power supply with appliance requiring more than 2.1A.
Do not attempt to open this unit.
Remove from mains when not in use.
Do not use if unit appears to be damaged.
Do not use device near water or when wet.
The socket-outlet should be installed near the equipment and should be easily accessible.

INSTRUCTIONS FOR USE

Before using, check your device’s input voltage and this charger’s output voltage for compatibility. Make sure the total loading does not exceed the rated output current of this charger.
Connect your device to the charger using a FIFO USB cable.
Plug this charger into mains outlet (240V AC in the UK).
Your digital device should indicate it is now in charging mode.
Please unplug this charger from wall outlet when not in use.

AFTER-SALES SUPPORT

If you discover that this product contains a manufacturing defect which affects the operation of this device, you may return it to any site in Belgium that sells FIFO accessories and exchange it for a new FIFO item of the same value, subject to availability. This does not affect your statutory rights. If you experience any problems obtaining a replacement item or require any other assistance, please contact via our email: info@fifoeurope.com

FIFO EARPHONES

OWNER’S MANUAL

Thank you for purchasing this FIFO Earphones. Please read this manual carefully. It contains important operating instructions. This unit is for

listening to music and other audio when connected to a device with a 3.5mm audio output.

SPECIFICATIONS

Product SKU: 60223,60411,60101, 60102, 60103, 60104, 60105,46625,46602

Input: 3.5mm Audio Jack

Product SKU: 71273

Input: USB C port

SAFETY PRECAUTIONS

Take care not to listen to audio that is loud to prevent damage to your hearing
Do not use earphones when walking, cycling, driving, operating machinery or any other task that requires concentration and the use of your hearing to make yourself aware of potential dangers or hazards in your proximity.
Keep earphones away from babies and small children as small parts may cause danger if swallowed.
Take care to make sure earbuds are connected properly when inserting into ears to prevent them falling off and remaining inside your ear.
Do not attempt to open this unit.
Remove from mains when not in use.
Do not use if unit appears to be damaged.
Do not use device near water or when wet.

INSTRUCTIONS FOR USE

Before use, make sure the correct sized earbuds are attached to the end of the earphones and secured properly
Carefully insert end of cable into compatible 3.5mm jack output from your device
Make sure volume is not too loud before placing the other end of the earphones into your ears
Start playing audio

AFTER-SALES SUPPORT

FIFO USB CABLES

OWNER’S MANUAL

Thank you for purchasing this FIFO Charger. Please read this manual carefully. It contains important operating instructions.

This unit is designed for charging standard USB devices.

SPECIFICATIONS:

Product Brand: FIFO

Input: DC 5V 2A

Product Brand: FIFO Fast

Input: DC 5V 3A, 9V 2.22A, 12V 1.67A

SAFETY PRECAUTIONS

Do not short circuit.
Do not try to use this power supply with appliance requiring more than 2.1A.
Do not attempt to open this unit.
Please unplug the cable when not in use
Do not use if unit appears to be damaged.
Do not use device near water or when wet.
Position cables carefully, so as not to cause a trip hazard
For longer cables, keep out of reach of children

INSTRUCTIONS FOR USE

Before using, check your device’s compatibility with the cable you have purchased.
Connect your device to the cable using a FIFO USB charger connected to a suitable power source.
Your digital device should indicate it is now in charging mode.
Please unplug the cable when not in use
Do not leave cable connected for long periods of time unattended

AFTER-SALES SUPPORT

MYME POWER BANK

OWNER’S MANUAL

Thank you for purchasing this FIFO/MyMe Back-up Power Charger. Please read this manual carefully. It contains important operating instructions.

This unit is designed for charging standard USB devices.

SPECIFICATIONS:

Input: 5V DC @ 1A (Unless otherwise stated)

Output: 5V DC @ 1A (Unless otherwise stated)

Operating Temperature: 10°- 40°C

Capacity: 4,400mAh

Cell Type: Li-Polymer

SAFETY PRECAUTIONS

Do not short circuit.
Do not try to use this power supply with appliance requiring more than 2.1A.
Do not attempt to open this unit.
Please unplug the cable when not in use
Do not use if unit appears to be damaged.
Do not use device near water or when wet.
Position cables carefully, so as not to cause a trip hazard
For longer cables, keep out of reach of children
Avoid any damage to the Power Bank especially from impact.
Store in a cool, dry place at temperatures between -40°C and 45°C and in relative humidity below 75%.
Avoid contact between the device and corrosive substances and fire.
Do not short circuit.
Ensure correct voltage is used as continuous excessive voltage could damage your equipment.
Do not try to use this power supply with appliances requiring more than 1A.
Do not attempt to open this unit.
Do not use if unit appears to be damaged.
Please disconnect device when not in use.
Do not use device near water or when wet.
Please ensure the Power Bank is charged periodically (at least once every six months) to maintain its charging capacity.

INSTRUCTIONS FOR USE

Before using, check your device’s input voltage and this Power Bank’s output voltage to ensure compatibility. Make sure the total load does not exceed the rated output current of this charger.
Before using the Power Bank, connect it to an appropriate USB power source using the micro USB cable included to charge it (ensure the smaller micro USB end of the cable is connected to the Power Bank and the larger USB A end of the cable is connected to the USB Power Source).
The LED light should start blinking to indicate that the Power Bank is being charged.
To use the Power Bank to charge your device, connect the larger USB A end of the cable to the Power Bank and the smaller micro USB end of the cable to the device you want to charge. To connect to devices that don’t use micro USB, please use a compatible adapter or an alternative USB cable.
Once your device is connected, the LED lights on the Power Bank should begin to blink to indicate that your device is charging. Once charging is complete, your Power Bank should go into sleep mode and stop charging. If you disconnect the Power Bank and reconnect it to your device, it may take up to 15 seconds for the Power Bank to start charging your device again.
If the Power Bank does not begin charging your device, please check the connection and that the Power Bank has been charged.
When you have finished charging your device, please remove the cable. The Power Bank will stop charging after it is disconnected.
When the Power Bank is out of power, please re-charge it by connect it to an appropriate USB power source using the micro USB cable.

AFTER-SALES SUPPORT